視覺點膠機更換點膠閥及膠水注意事項！
目視調色機更換調色閥和膠水需要注意什么?,視覺點膠機需要手動編輯好的程序,這個過程非常簡單,通常是一個好產品的時間是3分鐘,雖然高速視覺配藥機操作非常簡單,如果視覺調劑調劑機或將會(huì )有很多問題。不同的視覺調劑模式需要一定的技術來滿足產品調劑的效果。所以今天我們就來談?wù)勛詣?dòng)可視點膠機在點膠過程中需要注意的問題。
What should be paid attention to when changing the color mixing valve and glue of the visual dispenser? First of all, the visual dispenser needs to manually edit a good program. This process is very simple, usually a good product takes 3 minutes. Although the operation of the high-speed visual dispenser is very simple, if the visual dispenser is used, there will be many problems. Different visual adjustment modes need certain technology to meet the effect of product adjustment. So today we will talk about the automatic visual dispensing machine in the dispensing process needs attention.
點膠閥是視覺注意膠水的問題,視覺分發針頭和膠水點膠閥有很大關系,全自動高速點膠機器視覺的調劑閥門要求精度高,并具有良好的控制能力,市場上有很多類型的點膠閥,但功能是不同的,為免調整點膠閥閥連接和扮演什么角色,這沒有問題。
The dispensing valve is a problem of visual attention to glue. The visual dispensing needle has a lot to do with the glue dispensing valve. The fully automatic high-speed dispensing machine vision dispensing valve requires high precision and has good control ability. There are many types of dispensing valves in the market, but the functions are different. There is no problem in order to avoid adjusting the connection and role of the dispensing valve.
視覺調劑調劑選擇針,雖然有一個高精度點膠閥是不夠的,操作點膠機器視覺,需要嚴格按照要求選擇調劑針,否則會(huì )有膠水點膠閥,這不利于視覺效果,指出通過膠水分發針頭是分發機器視覺是一個需要注意的問題。
Although a high-precision dispensing valve is not enough to operate dispensing machine vision, it is necessary to select dispensing needle in strict accordance with the requirements, or there will be glue dispensing valve, which is not conducive to the visual effect. It is pointed out that dispensing machine vision through glue dispensing needle is a problem to be paid attention to.
目視調色機的使用一般是先編輯程序，然后調試膠水，但在目視調色機中調試膠水是一個很大的問題，所以目視調色注意膠水的選擇和使用注意事項。
Visual palette machine is usually used to edit the program first, then debug the glue, but debugging glue in visual palette machine is a big problem. Therefore, we should pay attention to the selection of the glue and the matters needing attention in visual palette.
對目視點膠機使用的點膠閥內殘留膠水進行清理，并用膠水產生的化學品的水或溶液進行清洗。不同的膠水需要使用不同的分配閥。在將調色閥安裝到可視調色機之前，需要安裝調色閥使用的所有附件。防止橡膠泄漏和空氣泄漏。
Clean the residual glue in the dispensing valve used by the visual dispensing machine, and clean it with the water or solution of the chemical produced by the glue. Different glue requires different distribution valves. Before you install the toner valve to the visual toner, you need to install all the accessories used by the toner valve. Prevent rubber leakage and air leakage.
上一篇：自動點膠機為什么有三軸四軸五軸之分？
下一篇：分析硅膠點膠機對封裝環境有什么要求？
