正確使用打膠機很關鍵
在現實使用中，打膠機的使用不可避免的存在著一些不正確的操作方法。這些不正確的操作方法有可能導致打膠機相關零件的損害，從而影響打膠機的打膠質量，更有甚者可能影響打膠機的使用壽命。那么下面
雙組份打膠機廠家就來講講正確的方法。
In the actual use, there are inevitably some incorrect operation methods in the use of the gluing machine. These incorrect operation methods may cause damage to relevant parts of the glue dispenser, thus affecting the glue dispensing quality of the glue dispenser, and even the service life of the glue dispenser. Then the manufacturer of the two-component gluing machine will talk about the correct method.
1、要記住的是，在打膠機的運行過程中，不要觸碰一些正在運動的關鍵部位和帶電的地方，防止發生危險。同時也要注意的是要讓打膠機保持干凈整潔，不要將無關的物件放在加工設備上，防止發生不必要的麻煩。
1. Keep in mind that during the operation of the glue applicator, do not touch some moving key parts and live places to prevent danger. At the same time, it is also important to keep the glue applicator clean and tidy. Do not put irrelevant objects on the processing equipment to prevent unnecessary troubles.
2、在打膠過程中注意打膠速度的調試，供膠機和打膠機的相互配合。也要注意人工操作和打膠機的配合。
2. During the gluing process, pay attention to the adjustment of the gluing speed and the mutual cooperation between the glue feeder and the gluing machine. Also pay attention to the cooperation between manual operation and gluing machine.
3、在開始工作時，確保打膠機能正常運行，打膠是否正常、速度是否勻稱。如發現異常，應立即停機進行檢查，否則可能會(huì )導致打膠機的損壞。
3. When starting the work, make sure that the gluing machine operates normally, whether the gluing is normal and whether the speed is symmetrical. If any abnormality is found, stop the machine immediately for inspection, otherwise the glue applicator may be damaged.
3、在使用打膠機的時候，很重要，另外及時的保養以及正確的使用可以使機器的壽命增加，提高產品質量以及提高產品的成產效率。
3. When using the gluing machine, safety is very important. In addition, timely maintenance and correct use can increase the service life of the machine, improve product quality and improve product production efficiency.
4、打膠工作結束的時候，要及時的清理膠管中剩余的雙組份膠。一旦膠在膠管中固化，會(huì )影響隔天的工程進度。于怎么清洗？將旋轉開關旋轉到清洗狀態和手動狀態，按下排膠鍵，接下來再按排膠閥，這時會(huì )排出黑膠。打開黑膠減壓閥進行排壓，待壓力降下之后擰緊閥門。排白膠操作過程同黑膠一樣。
4. At the end of the gluing work, the remaining two-component glue in the hose shall be cleaned in time. Once the glue is cured in the hose, the next day's project progress will be affected. As for how to clean it? Turn the rotary switch to the cleaning state and the manual state, press the glue discharge key, and then press the glue discharge valve. At this time, the black glue will be discharged. Open the black glue pressure reducing valve for pressure relief, and tighten the valve after the pressure drops. The operation process of discharging white glue is the same as that of black glue.
5、注意打膠機上的小零件的使用，打膠機作為一套加工設備而言，質量還是非常有保證的。但是損壞率比較高的就是像小吸盤、定位滑輪這些小零件。所以在日常使用過程中，還是對這些小零件精心呵護些，畢竟真的用壞了，也會(huì )影響工程進度不是。
5. Pay attention to the use of small parts on the gluing machine. As a set of processing equipment, the quality of the gluing machine is very guaranteed. However, small parts such as small suction cups and positioning pulleys have a high damage rate. Therefore, in the process of daily use, it is better to take care of these small parts carefully. After all, if they are really worn out, they will also affect the progress of the project.
此外如果是剛剛購買沒有多長時間的打膠機，在開始使用過程中會(huì )有一個磨合期。磨合期期間，使用打膠機要格外認真和小心。畢竟磨合期是決定后期打膠機好用與否的一個重要關鍵。關注我們
http://www.sdxfsljx.com，了解更多內容！
In addition, if you just bought a glue applicator that has not been used for a long time, there will be a running in period when you start using it. During the running in period, use the glue applicator with extra care. After all, the running in period is an important key to determine whether the glue applicator is easy to use in the later period. Follow us http://www.sdxfsljx.com Yes, learn more!
上一篇：如何做雙組份打膠機的日常維護工作
下一篇：打膠機拉絲斷膠問題是什么情況引起的？
