自動打膠機采用人機界面控制，自動化操作效率高，大大減輕了人的勞動負擔。自動打膠機選用不同的噴槍和噴涂機實施涂裝自動化，為什么這么說呢？下面來分析分析。
The automatic gluing machine is controlled by man-machine interface, which has high automatic operation efficiency and greatly reduces the labor burden of people. Automatic glue applicator uses different spray guns and spraying machines to implement coating automation. Why do you say so? Let's analyze.
1、由于自動打膠機的涂膠中沒有壓縮空氣，可以壓縮空氣中水分、油污等雜質帶來的弊端，不存在壓縮空氣在上層反彈造成的涂膠損失。涂層物體的表面。
1. Since there is no compressed air in the gluing of the automatic gluing machine, it can eliminate the disadvantages caused by impurities such as water and oil in the compressed air, and there is no gluing loss caused by the rebound of the compressed air in the upper layer. The surface of a coated object.
2. Due to the high pressure of the coating, it can be closely combined with the steel surface and penetrate into the pores, so the coating has good adhesion.
3、由于一次噴涂可實現較厚的涂膜（干膜厚度可達300mm以上），從而減少?lài)娡看螖怠?/div>
3. As one-time spraying can achieve a thicker film (the dry film thickness can reach more than 300mm), the spraying times can be reduced.
4、自動打膠機適用于噴涂厚膜涂料和高固含量涂料，既節省有機溶劑，又減少環境污染。
4. The automatic glue applicator is suitable for spraying thick film coatings and high solid content coatings, which not only saves organic solvents, but also reduces environmental pollution.
5、可實現涂裝自動化、工業自動化生產線和無人涂裝。
5. It can realize coating automation, industrial automation production line and unmanned coating.
6、自動打膠機采用不同的噴槍和噴涂機，可以噴涂狹窄的倉庫、高大的設備、建筑物等不同類型的物體。
6. The automatic glue applicator adopts different spray guns and spraying machines, which can spray different types of objects such as narrow warehouses, tall equipment and buildings.
此外需要在使用這個設備之前對設備進行調試，打膠機的調試非常簡單，一般只需要十多分鐘就可以完成調試。與其他設備程序不同，它對我們來說更方便。這種自動化設備由計算機程序控制，但顯示界面非常人性化。對于一些老用戶來說，這個操作也很容易理解，沒有太大的難度。銷售給各個年齡段的用戶。
In addition, the equipment needs to be debugged before using the equipment. The debugging of the glue applicator is very simple. Generally, it only takes more than ten minutes to complete the debugging. Unlike other device programs, it is more convenient for us. This automatic equipment is controlled by computer program, but the display interface is very humanized. For some old users, this operation is easy to understand and not too difficult. Sold to users of all ages.
濟南雙組份打膠機廠家提醒，我在使用打膠機的時候如果我們操作不當，這樣避免不了就會(huì )出現各種各樣的問題，因此可以直接找的工作人員進行調式，這樣在短時間內就能夠輕松的處理了。注意，在選擇之前一定要注意對打膠機調式的方式有針對性的進行了解，這樣在進行選擇了解的過程中才能夠保證在短時間內快速的修好機器。
The manufacturer of Jinan two-component glue applicator reminds me that if we operate the glue applicator improperly, various problems will inevitably occur. Therefore, we can directly find professional staff for adjustment, so that we can easily deal with them in a short time. Note: before selection, it is necessary to understand the adjustment mode of the glue applicator, so that the machine can be repaired quickly in a short time.
打膠機設備可實施涂裝自動化的相關內容就是這樣了，您可以來關注我們網站
www.sdxfsljx.com咨詢更多設備的使用事項！
This is the content related to the application automation of glue applicator equipment. You can pay attention to our website www.jntiannuo Com for more information about the use of the device!
上一篇：打膠機點膠時的三個常見缺陷
下一篇：雙組分涂膠機溢膠、涂覆、灌膠避免方法
