自動打膠機的特點有哪些？
1、用高壓空氣在設定的時間內，使用腳踏開關或自動把液體推出。
1. Use high-pressure air to push the liquid out by using the foot switch or automatically within the set time.
2、點膠機控制器有點滴,連動,定時滴膠功能;點滴就是直接觸發腳踏開關滴膠,并且可通過時間控制點膠量準確程度;連動就是用腳踏板之關閉時間多久來控制滴膠時間;定時滴膠就是觸發開關通過時間控制滴膠。
2. The dispenser controller has the functions of drip, linkage and regular drip; Drip is to directly trigger the foot switch to drip glue, and the accuracy of dispensing quantity can be controlled through time; Linkage is to use the closing time of the pedal to control the glue dropping time; Timing glue dropping is to trigger the switch to control glue dropping through time.
3、自動打膠機采用高精度數碼定時控制器,準確控制每次滴定時間,確切到毫秒，正確地控制液料流量，不會(huì )浪費液料。
3. The automatic gluing machine adopts high-precision digital timing controller to accurately control each titration time to milliseconds, correctly control the liquid material flow, and will not waste liquid material.
4、只要調節好氣壓，出膠時間和選擇適當的針咀，便輕易改變每次注滴量和注滴時間。
4. As long as you adjust the air pressure, glue outlet time and select the appropriate needle nozzle, you can easily change the amount and time of each infusion.
5、調整自動點膠閥尾部調節螺絲和膠水的壓力可控制出膠量大小。膠量調節螺絲順時鐘向下轉動為減小膠量，反時鐘方向轉動為加大膠量。
5. Adjust the pressure of the adjusting screw and glue at the tail of the automatic dispensing valve to control the glue output. Turn the glue amount adjusting screw clockwise to reduce the glue amount, and turn it counterclockwise to increase the glue amount.
The above is a detailed introduction to the two-component gluing machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sdxfsljx.com
上一篇：詳解雙組份打膠機比例泵密封圈
下一篇：雙組份打膠機對使用環境有什么樣的要求
