雙組份打膠機出膠壓力不足怎么辦？
中空玻璃打膠機除了丁基膠涂布機以外，還有雙組份打膠機，在使用較長時間和選擇一般配置的情況下，會(huì )出現感覺手中打出來的壓力不夠，那么是什么原因導致的呢，我們應該如何解決呢？
In addition to butyl glue coating machine, there are two-component glue coating machine for hollow glass gluing machine. When using for a long time and choosing the general configuration, there will be a feeling that the pressure in the hand is not enough, so what causes it and how should we solve it?
混膠問題
First mixing problem
我們在混合的時候使用手工攪拌，直接暴露在空氣中的攪拌混合的時候混進去的空氣；
We use hand mixing when mixing, directly exposed to the air when mixing the air mixed;
第二 中空玻璃打膠機廠家生產問題
Production problems of the second insulating glass gluing machine manufacturer
雙組份打膠機自動混合的，打膠機自動混合后有這樣的情況那就是廠家生產的時候沒有按照嚴格的工藝脫除A組份里面的空氣原因造成的。
The two-component dispenser is automatically mixed. After the dispenser is automatically mixed, there is such a situation that the manufacturer did not remove the air in component A according to strict process during production.
那么應該如何解決這些問題呢？
So how to solve these problems?
1 液壓站壓力不穩，將混合芯軸清洗一下試試
The pressure of 1 hydraulic station is not stable, clean the mixed mandrel for a try
2 混合不均主要是U型管內部有膠凝固，需要定期清理。
2. The uneven mixing is mainly due to the rubber solidification inside the U-shaped pipe, which needs to be cleaned regularly.
3 機器共膠路網堵住了清洗一下
3. The road network of the machine is blocked and cleaned
上一篇：灌膠機的膠管應該如何更換?
下一篇：點膠機在密封膠中的應用！
