中空玻璃打膠機的調試方法！
將其置于平整、清潔的表面上，接通電源和氣源，接通后即可開始工作。
Place it on a flat, clean surface, connect the power supply and air source, and then start work.
1. 打開氣泵開關、主電源開關和控制臺開關。按下控制臺手動按鈕，在顯示屏上找到原點設置，點擊輔助原點設置，再點擊頭部原點設置。
1. Open the air pump switch, main power switch and console switch. Press the console manual button, find the origin settings on the display screen, click the auxiliary origin settings, and then click the header origin settings.
2. 設置好后，返回到玻璃厚度設置。是玻璃厚度，然后是鋁墊片，然后是玻璃厚度。只要命令位置與當前位置值一致，請注意輸送帶上沒有玻璃的設置。
2. After setting, return to the glass thickness setting. The first is the glass thickness, then the aluminium gasket, and then the glass thickness. As long as the command position is consistent with the current position value, please note that there is no glass on the conveyor belt.
3.混合后,按下按鈕的桶膠水,按下按鈕的工作選擇,然后按下按鈕的膠水開始,然后按下按鈕切斷,此時,膠頭將膠水,然后按下按鈕切斷后的白色膠不能見,然后按下鏈接生產線自動運行,此時,膠水可以自動切斷。
3. After mixing, press the first bucket of glue of the button, press the working selection of the button, then press the glue of the button to start, and then press the button to cut off. At this time, the glue head will not see the glue, then press the button to cut off the white glue, and then press the link production line to run automatically. At this time, the glue can be cut off automatically.
噴膠機是現代工業中一種新型的自動噴膠設備，可對不同尺寸和形狀的產品進行噴膠。噴膠機的主要性能有以下要求:噴膠形狀可調、噴膠尺寸可調、背吸膠量可調、噴膠粘度不同、噴膠室清洗方便。主要用于皮具、手袋、箱包、玩具、包裝等行業。
Gum spraying machine is a new type of automatic gum spraying equipment in modern industry. It can spray gum on products of different sizes and shapes. The main performance of spraying machine has the following requirements: adjustable spraying shape, adjustable spraying size, adjustable backing absorption, different spraying viscosity, easy cleaning of spraying chamber. Mainly used in leather goods, handbags, bags, toys, packaging and other industries.
自動噴槍按送料方式可分為壓力式虹吸式和重力式三種。壓力噴槍通過壓力罐或雙間隙泵將壓力涂層涂到噴槍上。噴槍本身無罐，減輕了噴槍的重量，降低了操作的勞動強度，特別適用于連續外觀不連續的操作，防止因進料引起的工作停頓，提高工作效率，以達到非常好的噴槍質量。能夠從任何位置和角度操作槍。
The automatic spray gun can be divided into pressure siphon type and gravity type according to feeding mode. The pressure spray gun coats the pressure coating on the spray gun through a pressure tank or a double gap pump. The spray gun itself has no tank, which reduces the weight of the spray gun and the labor intensity of the operation. It is especially suitable for the continuous operation with discontinuous appearance, prevents the work stop caused by feeding, and improves the work efficiency, so as to achieve a very good quality of the spray gun. Can operate gun from any position and angle.
的下部虹吸噴槍油漆罐,壓縮空氣在前面一半的槍生產低壓真空,大氣壓力槍將從油漆罐油漆,涂料可分為600毫升和1000毫升兩種,根據噴涂量的大小。這種槍使用壓縮空氣，不需要其他設備。但一般操作水平，噴槍的傾斜度是有限的。虹吸式適用于各種涂料。
The lower siphon spray gun paint tank, compressed air in the front half of the gun to produce low-pressure vacuum, atmospheric pressure gun from the paint tank, paint can be divided into 600 ml and 1000 ml, according to the size of the spray. The gun uses compressed air and does not require other equipment. However, the inclination of the spray gun is limited at the general operating level. Siphon type is suitable for all kinds of coatings.
上一篇：雙組份打膠機是否可以打三層中空玻璃！
下一篇：中空玻璃打膠機耗電量怎么樣？
